EWP Training Perth | KI Training & Assessing

EWP training is not just a quick drive around a yard. A useful course should cover machine selection, ground conditions, exclusion zones, harness checks, emergency lowering, communication, rescue planning, and the limits of the specific platform type. That matters because scissor lifts, boom lifts, vertical lifts, and trailer-mounted units all behave differently when wind, slope, load, and nearby structures enter the job.

KITA trainers focus on the mistakes that cause real workplace incidents. Students learn how to complete pre-start inspections, read manufacturer plates, confirm safe working load, spot crushing hazards, and communicate clearly with spotters and other trades. The aim is not to memorise a checklist for assessment day, it is to build habits that transfer to a live Perth site.

Employers usually care about three things: the type of platform, the height and boom length involved, and whether the worker can prove recent competent operation. For many scissor lift and smaller platform tasks, a recognised EWP training outcome can satisfy site or hire yard requirements. For boom-type elevated work platforms with a boom length of 11 metres or more, WA workers generally need the correct high risk work licence pathway.

This is where many bookings go wrong. A worker asks for an EWP licence Perth course, but the right answer might be a short equipment course, a Yellow Card style pathway, a VOC, or TLILIC0005 depending on the machine and job. KITA checks the intended equipment before training so students are not left with a certificate their supervisor cannot use.

Elevated work platform course WA delivered at Welshpool

Our Welshpool campus at 70 Cleaver Terrace runs the elevated work platform course WA operators book most often. The yard has room for a scissor lift and a small boom, so students spend the practical session on the machine rather than watching a slideshow. Trainers walk through pre-start, ground assessment, controls, emergency lowering and safe stowage before any assessment begins. Groups stay small so every student gets stick time.

Scissor lift training Perth content and practical drills

Scissor lift training Perth sessions focus on the risks that catch operators out on real sites: uneven ground, kerbs, floor loadings, overhead services and passing traffic. Students practise setting up the machine, checking outriggers or wheel locks where fitted, elevating with a spotter and stowing before moving. Assessment covers hazard identification, safe operation and post-use checks so supervisors can sign off the VOC with confidence.

Yellow Card versus TLILIC0005 for boom operators

The split confuses new operators. A Yellow Card covers boom lifts under 11 metres and scissor lifts of any height, and it is issued by the training provider under the EWPA scheme. A boom lift with a platform height of 11 metres or more is high risk work and needs TLILIC0005, assessed against national units and lodged with WorkSafe WA for the licence card. KITA tells you which pathway matches your machine before you enrol so the certificate lines up with the job.

Boom lift ticket WA assessment and WorkSafe lodgement

For a boom lift ticket WA students complete TLILIC0005 Licence to operate a boom-type elevating work platform. Assessment includes a knowledge test, a practical demonstration on a boom of 11 metres or more and a verification interview. KITA submits the paperwork so students can pick up the high risk work licence card from Australia Post once WorkSafe processes the application, usually inside a fortnight.

Refresher cycle, VOC and retraining timeframes

Most Perth principal contractors ask for a verification of competency every two years, and some sites want it annually for higher risk work. A VOC is shorter than the full course because it confirms current skill rather than teaching from scratch. If a licence has lapsed for more than twelve months, or the operator has not used the machine for a long stretch, KITA recommends a full retrain so the paperwork holds up during a site audit.

EWP licence Perth delivery at Naval Base

South of the river operators book the EWP licence Perth course at our Naval Base campus at 51A Burlington Street. The yard suits Kwinana, Henderson and Rockingham crews who need training close to work. Delivery matches Welshpool for content and assessment so a ticket issued at either site carries the same weight with hire yards and principal contractors.

Customer story: Kwinana refinery maintenance crew

A maintenance supervisor at a Kwinana refinery brought six fitters through Naval Base for a scissor lift and boom refresher before a shutdown. Two operators needed the full TLILIC0005 because their old tickets predated the current unit code. KITA scheduled the group across two days, ran the assessments on site-matching machines and lodged the licence paperwork the same week. The crew hit the shutdown with current tickets and no scramble.

An aerial work platform, also known as an elevating work platform, cherry picker, bucket truck or mobile elevating work platform, is a mechanical device used to provide temporary access for people or equipment to inaccessible areas, usually at height. Source: Wikipedia, Aerial work platform.